Material |
Value |
||
PVC-U |
Polyvinylchloride |
The material polyvinyl chloride, also called rigid PVC, is an unplasticized amorphous thermoplastic. PVC is characterised by its high chemical resistance and is self-extinguishing after flame withdrawal. Further material characteristics are its high stability, rigidity and dimensional stability. In the area of ventilation, PVC is primarily chosen for interior use. |
· Density (specific weight): ≈ 1.42 g/cm³ ·· High chemical resistance: resistant against organic acids and lyes · Burning behaviour: self-extinguishing outside of flame · Operating temperature: 0 to +60°C · High resistance and rigidity · High corrosion resistance · Good electrical insulation |
PPs |
resistant Polypropylene |
The material flame resistant polypropylene is characterised by its high chemical stability and low density. Typical for the material is its high temperature stability in connection with flame resistance. PPs are further characterised by good surface hardness and good electrical insulating properties. In the area of ventilation, the material is suitable for interior use. |
Value |
PP-EL-s |
electrive conductive, flame resistant Polypropylene |
The material electrically conductive, flame resistant polypropylene is characterised by the good property profile of PPs together with the electrical conductivity. The PPs are provided with specifically conductive particles for this purpose. The material is used in explosion-proof rooms. |
|
PP |
Polypropylene |
The material polypropylene is characterised by a high chemical stability as well as very good stress cracking resistance and a good heat distortion point. The material also demonstrates high rigidity, hardness and strength. |
|
PVDF |
Polyvinylidenfluorid |
The material PVDF belongs to the fluoric polymers and is characterised by its very high chemical resistance, even at higher temperatures. The material demonstrates high rigidity and is insensitive to UV radiation. This results in a very good age resistance in the air environment. The raw material we process is FM 4910 certified. This means that our products can also be used in clean rooms. |
Value |
PE-HD PE 100 |
High density Polyethylene |
The material polyethylene is characterised by its high tightness and rigidity even at low temperatures. PE-HD is of high chemical stability. Above all, the material is UV resistant and can also be used at temperatures below freezing. |
|
PE 80 |
Value |
||
Value |
Value |
Value |
|
ECTFE |
